CRD100 Tubing Cutter

Product Description

This semi-automatic, table-top device is designed for precision and speed in the production environment. The actuating button found on the adjustable slide block makes the medical tubing cutter ergonomically friendly and easy to operate. This precision crafted and industrial cleanroom product has several thousand hours of proven operational effectiveness. This high end model comes with a scale for medical use.

Technical Specifications

  • The "CRD100" will cut most flexible tubing, non-metallic braided tubing and heat-shrink from sizes of 1/16" (1.5mm) through 9/16" (14.5mm).
  • A recommended durometer of Shore A 100, or less, can be cut very effectively without "burring", tube deformation or excessive unit wear.
  • Six (6) easily Interchangeable bushing sets (1/8", 3/16", 1/4", 5/16", 3/8", 1/2 ") are available.
  • Minimum/maximum cut lengths range from 7/8" to 24".
  • Power supplies for both North America (120VAC) and Europe (230VAC) to be specified at the time of order.
  • Requires 80-120PSI air supply.
  • 90 days parts and labor warranty . See users manual for warranty details.
  • The tube cutting unit is designed for both right and left-hand operation by simply rotating the device and electronics cover.

FOR PRICING CONTACT US AT (303) 438-0853 OR EMAIL US AT SALES@CLEANROOMDEVICES.COM

 



CRD120 Tubing Cutter

Product Description

This semi-automatic, table-top device is designed for precision and speed in the production environment. The foot pedal allows for easier operation when using both both hands to handle tubing. This precision crafted and industrial cleanroom product has several thousand hours of proven operational effectiveness. This unit is more economical compared to the CRD100.

Technical Specifications

  • The "CRD120" will cut most flexible tubing, non-metallic braided tubing and heat-shrink from sizes of 1/16" (1.5mm) through 9/16" (14.5mm).
  • A recommended durometer of Shore A 100, or less, can be cut very effectively without "burring", tube deformation or excessive unit wear.
  • Six (6) easily Interchangeable bushing sets (1/8", 3/16", 1/4", 5/16", 3/8", 1/2 ") are available.
  • Minimum/maximum cut lengths range from 7/8" to 24".
  • 90 days parts and labor warranty . See users manual for warranty details.
  • The tube cutting unit is designed for both right and left-hand operation by simply rotating the device and electronics cover.
  • Requires 80-120PSI air supply.

FOR PRICING CONTACT US AT (303) 438-0853 OR EMAIL US AT SALES@CLEANROOMDEVICES.COM

 



CRD120S Short Cut

Product Description

This semi-automatic, table-top device is designed for precision and speed in the production environment. The foot pedal allows for easier operation when using both both hands to handle tubing as well as the precision stop pin. This cutter will allow you to cut tubing as short as .050" in lenght, and up to 9/16" O.D. This precision crafted and industrial cleanroom product has several thousand hours of proven operational effectiveness.

Technical Specifications

  • The "CRD120" will cut most flexible tubing, non-metallic braided tubing and heat-shrink from sizes of 1/16" (1.5mm) through 9/16" (14.5mm).
  • A recommended durometer of Shore A 100, or less, can be cut very effectively without "burring", tube deformation or excessive unit wear.
  • Six (6) easily Interchangeable bushing sets (1/8", 3/16", 1/4", 5/16", 3/8", 1/2 ") are available.
  • Minimum/maximum cut lengths as short as .050".
  • 90 days parts and labor warranty . See users manual for warranty details.
  • The tube cutting unit is designed for both right and left-hand operation by simply rotating the device and electronics cover.
  • This cutter uses a stainless steel rasor blade.
  • Requires 80-120PSI air supply.

FOR PRICING CONTACT US AT (303) 438-0853 OR EMAIL US AT SALES@CLEANROOMDEVICES.COM